CONFERENCES

69. D. Lee, J. Kim, N. Cho, S. Kauh, and J. Lee, “Microcapillary mass sensors with electrical readout via quartz tuning fork”, The 13th International Workshop on Nanomechanical Sensing, Delft, The Netherlands, June 2016.

68. S. Kim and J. Lee, “Wear characteristics of hydrogel atomic force microscope probes under dynamic mode imaging”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2016.

67. D. Lee, S. Kauh, and J. Lee, “Harnessing electrical readout for microcapillary tube string resonators with quartz tuning forks”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2016.

66. J. Song, S. Kim, and J. Lee, “Development of Fabrication Processes for Nanochannel Resonators towards High Resolution Mass Sensing Applications in Liquids”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.

65. J. Lee, J. Song, and J. Lee, “Nanotribological and wear characteristics of hydrogel nanotips and facile regeneration for atomic force microscope applications”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.

64. K. Kim, J. Lee, T. Kim, W. Kim, and J. Lee, “Development of liquid metal mirror for optical-lever detection of transparent hydrogel atomic force microscope cantilevers”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.

63. D. Lee, J. Kim, N. Cho, S. Kauh, and J. Lee, “Nanoliter level liquid density measurements using microtube resonance detection via quartz tuning fork”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.

62. S. Kim, J. Lee, and J. Lee, “Effect of scan parameters on the tip wear and imaging quality of hydrogel atomic force microscope cantilevers using non-contact mode imaging”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.

61. J. Song, J. Je, and J. Lee, “Towards multiscale fluidic channel networks via internal oxidation and oxide etching based on self-assembled silicon-on-nothing structures”, The 29th IEEE Conference on Micro Electro Mechanical Systems, Shanghai, China, January 2016.

60. I. Chae, F. Khan, J. Song, J. Lee, J. Lee, and T. Thundat, “Standoff infrared spectroscopy on energetic materials using hydrogel microcantilevers”, The 29th IEEE Conference on Micro Electro Mechanical Systems, Shanghai, China, January 2016.

59. S. Kim, and J. Lee, “Development of hyperelastically stretchable strain gauge based on liquid metals and platinum catalyzed silicone elastomers”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.

58. K. Kim, J. Lee, and J. Lee, “Liquid metal reflective coating for optical detection of transparent atomic force microscope cantilevers”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.

57. S. Kim, and J. Lee, “Micro thermal sensor using florescent ref-shift of quantum-dot encapsulated hydrogel probe”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.

56. J. Song, J. Lee, and J. Lee, “Fabrication of sub-20nm hydrogel cantilever tip using oxygen plasma ashing for high-resolution imaging”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.

55. J. Lee, J. Song, and J. Lee, “Nanotribogical and wear characteristics of hydrogel nanotips and facile regeneration”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.

54. J. Kim, J. Je, J. Song, K. Kim, S. Kim, and J. Lee, “Novel wafer-batch fabrication strategy for microfluidic resonators”, The 5th Canada-Korea Conference on Science and Technology, Calgary, Canada, July 2015.

53. J. Kim and J. Lee, “Novel wafer-level batch fabrication strategy for microfluidic resonators”, The 12th International Workshop on Nanomechanical Sensing, Auckland, New Zealand, July 2015.

52. S. Kim, J. Choi, B. Choi, and J. Lee, “Hyper-elastically stretchable gauges based on liquid metals and platinum-catalyzed silicone elastomers”, The 18th International Conference on Solid-State SensorsActuators and Microsystems, Anchorage, USA June 2015.

51. J. Lee, J. Je, J. Song, and K. Kim, “Novel wafer-level batch fabrication technique for microfluidic resonators”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2015.

50. J. Kim, J. Song, and J. Lee, “Microtube resonator for high resolution mass sensing in liquids”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.

49. J. Choi, S. Kim Lee, J. Lee, and B. Choi, “Development of hyperelastic strain gauges based on liquid metals and platinum catalyzed silicone elastomers”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.

48. S. Kim, J. Kim, J. Lee, and B. Choi, “Development of custom atomic force microscope combined with digital mask lithography”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.

47. J. Je and J. Lee, “Towards batch fabrication of nanochannels and suspended nanotubes based on silicon on nothing structures”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.

46. J. Song and J. Lee, “Hydrogel microcantilever, a superior AFM cantilever for the exploration of biological phenomena in cellular level”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.

45. J. Lee and J. Lee, “Shape, size and tip sharpness tuning of hydrogel microcantilevers via ultra-violet curing with elastomeric replica moulds”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.

44. J. Kim and J. Lee, “Development of microfluidic resonators via silicon-on-nothing technique”, The 28th IEEE Conference on Micro Electro Mechanical Systems, Estoril, Portugal, January 2015.

43. J. Lee, “Hydrogel microcantilevers for atomic force microscopy applications”, The 16th International Scanning Probe Microscopy Conference, Seoul, Korea, July 2014.

42. J. Lee and I. Lee, “Development of hydrogel microcantilevers for localized material delivery applications”, The 11th International Workshop on Nanomechanical Sensing, Madrid, Spain, April 2014.

41. J. Song and J. Lee, “Development of low stiffness hydrogel microcantilevers for high-precision stiffness measurements of bilogical samples”, The 16th Korean MEMS Conference, Jeju Island, Korea, April 2014.

40. J. Kim and J. Lee, “Effects of XeF2 etch undercut on resonant characteristics of silicon dioxide microbridges”, The 16th Korean MEMS Conference, Jeju Island, Korea, April 2014.

39. I. Lee and J. Lee, “Development of hydrogel microcantilevers for local functional material delivery”, The 16th Korean MEMS Conference, Jeju Island, Korea, April 2014.

38. J. Je and J. Lee, “Development of liquid metal microheaters with reliable electrode configuration”, The 16th  Korean MEMS Conference, Jeju Island, Korea, April 2014.

37. I. Lee and J. Lee, “Fabrication and characterization of all hydrogel cantilevers for atomic force microscopy applications”, The 27th IEEE Conference on Micro Electro Mechanical Systems, San Francisco, USA, January 2014.

36. J. Je and J. Lee, “Fabrication and characterization of liquid metal microheaters”, Fall conference of the Korean Society of Mechanical Engineers, Kangwon, Korea, December 2013.

35. I. Lee, and J. Lee, “Fabrication of hydrogel atomic force microscope cantilevers using dynamic mask lithography”, Fall conference of the Korean Society of Mechanical Engineers, Kangwon, Korea, December 2013.

34. W. Lee, J. Lee, and S. Kang, “Analysis of flow characteristics for viscosity sensing applications of suspended microchannel resonators”, Fall conference of the Korean Society of Mechanical Engineers, Kangwon, Korea, December 2013.

33. I. Lee and J. Lee, “Highly uniform and controllable Micropatterning of a Hydrogel on microcantilever Sensors”, The 17th International Conference on Solid-State SensorsActuators and Microsystems, Barcelona, Spain, June 2013.

32. J. Kim, B. J. Lee, W. P. King and J. Lee, “Optical heating and temperature sensing of heated microcantilevers using two-wavelength thermoreflectance”, The 10th International Workshop on Nanomechanical Sensing, California, USA, May 2013.

31. I. Lee and J. Lee, “One-step fabrication of hydrogel microcantilevers using dynamic mask photolithography”, The 10th International Workshop on Nanomechanical Sensing, California, USA, May 2013.

30. D. Estrada, Z. Li, S. Dunham, G. Choi, N. Wang, Y. Meng, F. Lian, J. Lee, J. Zuo, W. P. King, J. A. Rogers, D. G. Cahill, and E. Pop, “Thermal anisotropy of layer-by-layer assembled graphene films”, 2013 MRS Spring Meeting, California, USA, April 2013.

29. J. Kim, B. J. Lee, and J. Lee, “Thermal characterization of heated microcantilevers using two- wavelength laser thermoreflectance microscopy”, The 15th Korean MEMS Conference, Jeju, Korea, April 2013.

28. I. Lee and J. Lee, “Highly controllable local patterning of a hydrogel on microcantilevers”, The 15th Korean MEMS Conference, Jeju, Korea, April 2013.

27. J. Kim, S. Han, K. Park, B. J. Lee, W. P. King and J. Lee, “DC and AC electrothermal characterization of heated microcantilevers using scanning thermoreflectance microscopy”, The 26th IEEE Conference on Micro Electro Mechanical Systems, Taipei, Taiwan, January 2013.

26. J. Kim and J. Lee, “DC and AC thermal characterization of heated microcantilevers using thermoreflectance microscopy”, Fall conference of the Korean Society of Mechanical Engineers, Changwon, Korea, November 2012.

25. I. Lee and J. Lee, “Precision density and volume change measurements of ethanol-water binary mixtures using suspended microchannel resonators”, Fall conference of the Korean Society of Mechanical Engineers, Changwon, Korea, November 2012.

24. I. Lee and J. Lee, “Measurement of mixing ratio and volume change of ethanol-water binary mixtures using suspended microchannel resonators”, The 11th IEEE SENSORS, Taipei, Taiwan, October 2012.

23. I. Lee and J. Lee, “Quality factor and vibration amplitude based viscosity measurements using suspended microchannel resonators”, The 11th IEEE SENSORS, Taipei, Taiwan, October 2012.

22. I. Lee and J. Lee, “Low volume and high precision viscosity measurement with suspended microchannel resonators”, The 9th International Workshop on Nanomechanical Sensing, Mumbai, India, June 2012.

21. J. Kim, I. Lee and J. Lee, “Bimodal mass sensing using suspended microchannel resonators”, The 14th Korean MEMS Conference, Jeju, Korea, April 2012.

20. I. Lee and J. Lee, “Measurement uncertainties in resonant characteristics of MEMS resonators”, The 14th  Korean MEMS Conference, Jeju, Korea, April 2012.

19. J. Lee, G. Chen, W. Shen, K. Payer, T. Burg, W. Rodriguez, M. Toner, and S. Manalis, “Weighing nanoparticles and viruses using suspended nanochannel resonators”, The 24th IEEE Conference on Micro Electro Mechanical Systems, Cancun, Mexico, 2011.

18. J. Lee and S.R. Manalis, “Second eigenmode operation of suspended microchannel resonators for high precision flow through mass sensing”, Hilton Head Workshop 2010: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head Island, SC, 2010.

17. Y. Liu, N. Privorotskaya, J. Lee, H. Zeng, J.A. Carlisle, A.Radadia, L. Millet, R. Bashir, and W.P. King, “Rapid thermal lysis of cells using silicon-diamond microcantilever heaters”, The 7th International Workshop on Nanomechanical Cantilevers, Banff, Canada, 2010.

16. C. M. Spadaccini, E. V. Mukerjee, J. Lee, and W.P. King, “Rapid thermal analysis of energetic materials with microfabricated differential scanning calorimeters”, The 15th International Conference on Solid-State Sensors, Actuators, and Microsystems, Denver, CO, 2009.

15. J. Lee, C. M. Spadaccini, E. V. Mukerjee, and W.P. King, “Suspended membrane single crystal silicon micro hotplate for differential scanning calorimetry”, The 22nd IEEE Conference on Micro Electro Mechanical Systems, Sorrento, Italy, 2009.

14. K. Park, J. Lee, W. P. King, and R. Bhargava, “Femtogram-level spectroscopic analysis using functional self-cleaning scanning probe tips”, The 59th Annual Pittsburgh Conference and Exposition on Analytical Chemistry and Applied Spectroscopy, New Orleans, LA2008.

13. J. Lee and W.P. King, “Heated atomic force microscope cantilevers for nanoscience and nanoengineering”, The 10th International scanning probe microscopy conference, Seattle, WA, 2008

12. D. Wang, T. Okada, R. Szoszkiewicz, S.C. Jones, M Lucas, J. Lee, W.P. King, S.R. Marder, E. Riedo, “Reversible nanoscale local wettability modifications by thermochemical nanolithography”, Materials Research Society Symposium, v. 1059, 2008.

11. Y. Hua, C.L. Henderson, J. Lee, and W.P. King, “Nanolithography on crosslinked polymers using heated AFM cantilever probes”, The 51st International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, Denver, CO, 2007.

10. J. Lee and W.P. King, “Array of microcantilever heaters with integrated piezoresistors”, IEEE International Conference on Nanotechnology 2007, Hong Kong, 2007.

9. J. Lee, F.T. Goericke, and W.P. King, “Temperature dependent mechanical properties of doped silicon microcantilevers”, The 14th International Conference on Solid-State Sensors, Actuators, and Microsystems, Lyon, France, 2007.

8. K. Park, J. Lee, Z.M. Zhang, and W.P. King, “Nanotopographic imaging using heated microcantilever in tapping mode”, The 14th International Conference on Solid-State Sensors, Actuators, and Microsystems, Lyon, France, 2007.

7. J. Lee, H. Hunter, F. T. Goericke, N. Naik, M.G. Allen, A. Glezer, and W.P. King, “IPACK2007- 31291 Measurements of microjet cooling and phase change characteristics using microcantilever heaters”, The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Vancouver, BC, 2007.

6. J. Lee, T. Beechem, K. Park, Z.M. Zhang, S. Graham, and W.P. King, “Thermal and mechanical characterization and calibration of heated microcantilevers”, Hilton Head Workshop 2006: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head Island, SC, 2006.

5. J. Lee, K. Naeli, H. Hunter, J. Berg, T.L. Wright, C. Courcimault, N. Naik, M.G. Allen, O. Brand, A. Glezer, and W.P. King, “IMECE2005-81732 Micro-cantilever based metrology tool for flow characterization of liquid and gaseous micro/nanojets”, ASME International Mechanical Engineering Congress & Exposition, Orlando, FL, 2005.

4. N. Naik, C. Courcimault, J. Berg, H. Hunter, J. Lee, K. Naeli, T. Wright, M.G. Allen, O. Brand, A. Glezer and W.P. King, “IMECE2005-81698 Fabrication and characterization of liquid and gaseous micro- and nanojets”, ASME International Mechanical Engineering Congress & Exposition, Orlando, FL, 2005.

3. J. Lee, T.L. Wright, M.R. Abel, E.O. Sunden, A. Marchenkov, S. Graham, and W.P. King, “IPACK2005- 73456 Characterization of heated atomic force microscope cantilevers in air and vacuum”, The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, San Francisco, CA, 2005.

2. A. Hammiche, M. Reading, T.L. Wright, J. Lee, W.P. King, H.M. Pollock, and R. Shetty, “Nanothermal analysis (n-TA) and photothermal IR micro-spectroscopy (PTMS), at sub-250 nm spatial resolution”, STM 2005 – The 13th International Conference on Scanning Tunneling Microscopy/Spectroscopy and Related Techniques, Sapporo, Japan, 2005.

1. W.P. King, J. Lee, J. Berg, and A. Glezer, “Microcantilever measurements in microscale liquid jets”, 2004 Meeting of the American Physical Society, Division of Fluid Dynamics, Seattle, WA, 2004.