JOURNALS

61. L. Zhang, W. Zheng, H. Lee, J. Lee, L. Wu, and D. Kim, “A study of morphological evolution of silicon micro-structure based on phase field model”, submitted to Microsystem Technologies.

60. S. Chaudhari, K. Chaudhuri, S. Kim, F. Khan, J. Lee, and T. Thundat, “Electrophoresis assisted time-of-flow mass spectrometry using hollow nanomechanical resonators”, submitted to Scientific Reports.

59. D. Estrada, Z. Li, G. Choi, S. N. Dunham, A. Serov, J. Lee, Y. Meng, F. Lian, N. C. Wang, R. T. Haasch, J. Zuo, W. P. Kng, J. A. Rogers, D. G. Cahill, and E. Pop, “Thermal anisotropy in layer-by-layer assembled polycrystalline graphene films”, submitted to Scientific Reports.

58.  D. Lee, J. Kim, N. Cho, T. Kang, S. Kauh, and J. Lee, “Pulled microcapillary tube resonators with electrical readout for mass sensing applications”, Scientific Reports, 6, 33799 (2016). [link]

57. I. Chae, M. F. Khan, J. Song, T. Kang, J. Lee, and T. Thundat, “Standoff Mechanical Resonance Spectroscopy Based on Infrared-Sensitive Hydrogel Microcantilevers”, Analytical Chemistry, 88(19), p 9678–9684 (2016). [link]

56. K. Kim, S. Kim, T. Kim, W. Kim, and J. Lee, “Spray-coated liquid metal reflectors for transparent hydrogel atomic force microscope cantilevers”, Journal of Microelectromechanical Systems, 25(5), p. 848-850 (2016). [link]

55. S. Kim, J. Lee, and B. Choi, “3D Printed Fluidic Valves for Remote Operation via External Magnetic Field”, International Journal of Precision Engineering and Manufacturing17(7), p. 937–942 (2016). [link]

54. M. F. Khan, N. Miriyal, J. Lee, M. Hassanpourfard, A. Kumar, and T. Thundat, “Heat capacity measurements of sub-nanoliter volumes of liquids using bimaterial microchannel cantilevers”, Applied Physics Letters, 108, 211906 (2016). [link]

53. J. Lee, J. Song, S. Kim, S. Kim, W. Lee, J. Jackman, D. Kim, N. Cho, and J. Lee, “Multifunctional hydrogel nano-probes for atomic force microscopy”, Nature Communications 7, doi: 10.1038/ncomms11566 (2016). [link]

52. S. Hamian, A. M. Gauffreau, T. Walsh, J. Lee, and K. Park, “Electrothermal Characterization of Doped-Si Heated Microcantilevers Under Periodic Heating Operation”, Journal of Heat Transfer138(5), 052401-052401-9 (2016). [link]

51. J. Kim, J. Song, K. Kim, S. Kim, J. Song, N. Kim, M. F. Khan, L. Zhang, J. E. Sader, K. Park, D. Kim, T. Thundat, and J. Lee, “Hollow microtube resonators via silicon self-assembly toward subattogram mass sensing applications”, Nano Letters, 16(3), p. 1537–1545 (2016). [link]

50. J. Choi, S. Kim, J. Lee, and B. Choi, “Improved Capacitive Pressure Sensors Based on Liquid Alloy and Silicone Elastomer”, IEEE Sensors Journal15(8), p. 4180-4181 (2015). [link]

49. S. Kim, J. Lee, and B. Choi. “Stretching and Twisting Sensing with Liquid-Metal Strain Gauges Printed on Silicone Elastomers”, IEEE Sensors Journal, 15(11), p. 6077-6078 (2015). [link]

48. T. Walsh, J. Lee, and K. Park, “Laser-assisted photothermal heating of a plasmonic nanoparticle-suspended droplet in a microchannel”, Analyst ,140(5), p.1535-1542 (2015). [link]

47. J. Je, and J. Lee, “Design, fabrication, and characterization of liquid metal microheaters”, Journal of Microelectromechanical Systems, 23(5), p.1156-1163 (2014). [link]

46. D. Lee, M. Lee, N. Jung, M. Yun, J. Lee, T. Thundat, S. Jeon, “Modulus-tunable magnetorheological elastomer microcantilevers”, Smart Materials and Sturctures23 055057 (2014). [link]

45. H. Park, B. Lee, and J. Lee, “Simultaneous determination of local temperature and thickness of heated cantilevers using two-wavelength thermoreflectance”, Review of scientific instruments85 036109 (2014). [link]

44. S. Olcum, N. Cermak, S. C. Wasserman, K. S. Christine, H. Atsumi, K. Payer, W. Shen, J. Lee, A. M. Belcher, S. N. Bhatia, and S. R. Manalis, “Weighing nanoparticles in solution at the attogram scale”, Proceedings of the National Academy of Sciences of the United States of America,  111(4) p.1310–1315 (2014). [link]

43. M. Yun, I. Lee, S. Jeon, and J. Lee, “Facile phase transition measurements for nanogram level liquid samples using suspended microchannel resonators”, IEEE Sensors Journal14(3) p.781-785 (2014). [link]

42. M. Yang, J. Choi, J. Lee, N. Hur, and D. Kim, “Wet blasting as a deburring process for aluminum”, Journal of Materials Processing Technology214 p.524-530 (2014). [link]

41. J. Kim, J. Lee, and B. Choi, “Fabrication and characterization of strain gauge integrated polymeric diaphragm pressure sensors”, International Journal of Precision Engineering and Manufacturing14(11) p.2003-2008 (2013). [link]

40. I. Lee and J. Lee, “Highly uniform and controllable micropatterning of a hydrogel on microcantilevers”, Journal of Mechanical Science and Technology27(11) p.3439-3444 (2013). [link]

39. J. Kim, S. Han, T. Walsh, K. Park, B. Lee, W.P. King, and J. Lee, “Temperature measurements of heated microcantilevers using scanning thermoreflectance microscopy”, Review of Scientific Instruments84 034903 (2013). [link]

38. I. Lee  and J. Lee, “Measurement uncertainties in resonant characteristics of  MEMS resonators”, Journal of Mechanical Science and Technology, 27(2) p.491-500 (2013). [link]

37. I. Lee, K. Park, and J. Lee, “Precision density and volume contraction measurements of ethanol-water binary mixtures using suspended microchannel resonators”, Sensors and Actuators A, 194 p.62-66 (2013). [link]

36. J. Park, K. Kim, J. Lee, H. Kim, and D. Huh, “Organomimetic microsystems technologies”, Biomedical Engineering Letters, 2, p.88-94 (2012).

35. I. Lee, K. Park, and J. Lee, “Precision viscosity measurement using suspended microchannel resonators”, Review of Scientific Instruments, 83 116106 (2012). [link]

34. Y. Kwon, H. Lee, J. Lee, and B. Choi, “Vibration mode-dependent energy harvesting characteristics of magnetoelectric composite cantilevers”,  IEEE Sensors Journal12(11) p.3271-3272 (2012). [link]

33. J. Lee, B.J. Lee, and W.P. King, “Deflection sensitivity calibration of heated microcantilevers using pseudo-gratings”, IEEE Sensors Journal, 12(8) p.2666-2667 (2012). [link]

32. J.E. Sader, T.P. Burg, J. Lee, and S.R. Manalis, “Energy dissipation in microfluidic beam resonators: Effect of Poisson’s ratio”, Physical Review E84 026304 (2011). [link]

31. J. Lee, A.K. Bryan, and S.R. Manalis, “High precision mass sensing using microchannel resonators in the second vibration mode”, Review of Scientific Instruments82 023704 (2011). Republished online in the Virtual Journal of Nanoscale Science and Technology[link]

30. J. Lee, R. Chunara, W. Shen, K. Payer, K. Babcock, T.P. Burg, and S.R. Manalis, “Suspended microchannel resonators with piezoresistive sensors”, Lab on a Chip11 p.645-651 (2011). [link]

29. J.E. Sader, J. Lee, and S.R. Manalis, “Energy dissipation in microfluidic beam resonators: Dependence on mode number”, Journal of Applied Physics108 114507 (2010). [link]

28. J. Lee, W. Shen, K. Payer, T.P. Burg, and S.R. Manalis, “Towards attogram mass measurements in solution with suspended nanochannel resonators”, Nano Letters10(7) p.2537-2542 (2010). Highlighted in Nature Nanotechnology[link]

27. N. Privorotskaya, Y. Liu, J. Lee, H. Zeng, J.A. Carlisle, A.Radadia, L. Millet, R. Bashir, and W.P. King, “Rapid thermal lysis of cells using silicon-diamond microcantilever heaters”, Lab on a Chip10 p.1135-1141 (2010). [link]

26. J. Lee, A. Liao, E. Pop, and W.P. King, “Electrical and thermal coupling to a single-wall carbon nanotube device using an electro-thermal nanoprobe”, Nano Letters9(4) p.1356-1361 (2009). [link]

25. O.A. Nafday, B.L. Weeks, W.P. King, and J. Lee, “Inducing nanoscale morphology changes of pentaerythritol tetranitrate using a heated atomic force microscope cantilever”, Journal of Energetic Materials27(1) p.1-16 (2009). [link]

24. J. Lee, C. M. Spadaccini, E. V. Mukerjee, and W.P. King, “Differential scanning calorimeter based on suspended membrane single crystal silicon micro hotplate”, Journal of Microelectromechanical Systems, 17(6) p.1513-1525 (2008). [link]

23. J. Lee and W.P. King, “Liquid operation of silicon microcantilever heaters”, IEEE Sensors Journal8(11) p.1805-1806 (2008). [link]

22. A. Loui, F.T. Goericke, T.V. Ratto, J. Lee, B.R. Hart, and W.P. King, “The effect of piezoresistive microcantilever geometry on cantilever sensitivity during surface stress chemical sensing”, Sensors and Actuators A, 147 p.516-521 (2008). [link]

21. W. Lee, L.J. Whitman, J. Lee, W.P. King, and P.E. Sheehan, “The nanopatterning of a stimulus responsive polymer by thermal dip-pen nanolithography”, Soft Matter4 p.1844-1847 (2008). [link]

20. J. Lee, H. Hunter, A. Glezer, and W.P. King, “Phase change and cooling characteristics of microjets measured using microcantilever heaters”, Sensors and Actuators A, 147 p.64-69 (2008). [link]

19. J. Lee, F. Goericke, and W.P. King, “Temperature dependent thermomechanical noise spectra of doped silicon microcantilevers”, Sensors and Actuators A145-146 p.37-43 (2008). [link]

18. J. Lee and W.P. King, “Microthermogravimetry using a microcantilever hotplate with integrated temperature compensated piezoresistive strain sensors”, Review of Scientific Instruments, 79 054901 (2008). Republished online in the Virtual Journal of Nanoscale Science and Technology[link]

17. K. Park, J. Lee, R. Bhargava, and W.P. King, “Routine femtogram-level chemical analyses using vibrational spectroscopy and self-cleaning scanning probe microscopy tips”, Analytical Chemistry, 80 p.3211-3228 (2008). [link]

16. J. Lee and W.P. King, “Improved all-silicon microcantilever heaters with integrated piezoresistive sensing”, Journal of Microelectromechanical Systems17(2) p.432-445 (2008). [link]

15. F. Goericke, J. Lee and W.P. King, “Microcantilever hotplates with temperature-compensated piezoresistive strain sensors”, Sensors and Actuators A143 p.181-190 (2008). [link]

14. J. Lee and W.P. King, “Microcantilever actuation via periodic internal heating”, Review of Scientific Instruments78 126102 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology. One of the 20 most downloaded articles from Reviw of Scientific Instruments during December 2007. [link]

13. D. Wang, R. Szoszkiewicz, M. Lucas, E. Riedo, T. Okada, S.C. Jones, S.R. Marder, J. Lee, and W.P. King, “Local wettability modification by thermomechanical nanolithography”, Applied Physics Letters91 243104 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology[link]

12. J.L. Remmert, Y. Wu, J. Lee, M.A. Shannon, and W.P. King, “Contact potential measurement using a heated atomic force microscope tip”, Applied Physics Letters91 143111 (2007). [link]

11. K. Park, J. Lee, Z.M. Zhang, and W.P. King, “Topography imaging with a heated atomic force microscope cantilever in tapping mode”, Review of Scientific Instruments78 043709 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology[link]

10. B.W. Chui, L. Aeschimann, T. Akiyama, U. Staufer, N.F. de Rooij, J. Lee, F. Goericke, W.P. King, and P. Vettiger, “Advanced temperature compensation for piezoresistive sensors based on crystallographic orientation”, Review of Scientific Instruments78 043706 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology[link]

9. K. Park, J. Lee, Z.M. Zhang, and W.P. King, “Frequency-dependent electrical and thermal response of heated atomic force microscope cantilevers”, Journal of Microelectromechanical Systems16(2) p.213-222 (2007). [link]

8. J. Lee, T.L. Wright, M.R. Abel, E.O. Sunden, A. Marchenkov, S. Graham, and W.P. King, “Thermal conduction from microcantilever heaters in partial vacuum”, Journal of Applied Physics, 101 014906 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology[link]

7. J. Lee and W.P. King, “Microcantilever hotplates: Design, fabrication, and characterization”, Sensors and Actuators A136 p.291-298 (2007). [link]

6. K.J. Kim, K. Park, J. Lee, Z.M. Zhang, and W.P. King, “Nanotopographical imaging using a heated atomic force microscope cantilever probe”, Sensors and Actuators A136 p.95-103 (2007). [link]

5. J. Lee, K. Naeli, H. Hunter, J. Berg, T.L. Wright, C. Courcimault, N. Naik, M.G. Allen, O. Brand, A. Glezer, and W.P. King, “Characterization of liquid and gaseous micro- and nanojets using microcantilever sensors”, Sensors and Actuators A, 134 p.128-139 (2007). [link]

4. N. Naik, C. Courcimault, H. Hunter, J. Berg, J. Lee, K. Naeli, T.L. Wright, M.G. Allen, O. Brand, A. Glezer, and W.P. King, “Microfluidics for generation and characterization of liquid and gaseous micro and nanojets”, Sensors and Actuators A134 p.119-127 (2007). [link]

3. A. Allen, A. Cannon, J. Lee, W.P. King, and S. Graham, “Flexible microdevices based on carbon nanotubes”, Journal of Micromechanics and Microengineering16 p.2722-2729 (2006). [link]

2. J. Lee, T. Beechem, T.L. Wright, B.A. Nelson, S. Graham, and W.P. King, “Electrical, thermal, and mechanical characterization of silicon microcantilever heaters”, Journal of Microelectromechanical Systems15(6) p.1644-1655 (2006). [link]

1. E.O. Sunden, T.L. Wright, J. Lee, W.P. King, and S. Graham, “Room-temperature chemical vapor deposition and mass detection on a heated atomic force microscope cantilever”, Applied Physics Letters88 033107 (2006). Republished online in the Virtual Journal of Nanoscale Science and Technology. [link]